performance specifications subject to change without notice. june 15, 2005 www.fgpsensors.com ? tel. (717) 721 9797 ? fax. (717) 721 9859 ? info@gssensors.com CS1060 s eries reaction torque sensor mechanical dimensions in mm [inch] f.s. in n.m [lb-ft] 5 to 100 [4 to 80] 101 to 300 [81 to 240] 301 to 800 [241 to 640] 801 to 3000 [641 to 2400] 3001 to 7000 [2401 to 5600] a 35 [1.38] 40 [1.57] 50 [1.97] 65 [2.56] 85 [3.35] b 35 [1.38] 40 [1.57] 45 [1.77] 55 [2.17] 60 [2.36] c 12.7 [1/2?] 19 [3/4?] 25.4 [1?] 38.1 [1?1/2] 50.8 [2?] d 59 [2.32] 80 [3.15] 95 [3.74] 135 [5.31] 160 [6.30] stiffness in lb-ft 1.4.10 1 to 6.9.10 2 6.9.10 2 to 2.7.10 3 2.7.10 3 to 8.2.10 3 8.2.10 3 to 4.1.10 4 4.1.10 4 to 1.2.10 5 the CS1060 has been designed to measure reaction torque. its sensing element is based on thin layer strain gauges in a wheatstone bridge configuration providing excellent temperature stability. optionally the torque sensor can receive an on-board amplifier for high level output. intermediate ranges are available at no extra cost. with many years of experience as a designer and manufacturer of sensors, fgp sensors often works with customers to design or customize sensors for specific uses and testing environments. to meet your needs we also offer complete turnkey systems. the matched components (sensor, power, amplifier and digital display) are formatted, calibrated and ready for immediate use. ? ranges from 5 to 7,000 nm [4 to 5,600 lb-ft] ? suited for static applications ? square male coupling ? high level output model with integrated amplifier free datasheet http://www.datasheet-pdf.com/
performance specifications nominal and subject to change without notice. current specifications see web-site. june 15, 2005 116 west chestnut st. ? ephrata pa 17522 tel. (717) 721 9797 ? fax. (717) 721 9859 ? www.fgpsensors.com ? info@gssensors.com technical specifications range (f. s.) from 5 nm to 7,000 nm [4 lb-ft to 5,600 lb-ft] over-range without damage : 1.5 x f.s. accuracy combined non linearity & hysteresis : 0.25% f.s. temperature range operating temperature range (otr) : -20 to 80 c [-4 to 176 f] compensated temperature range (ctr) : 0 to 60 c [32 to 140 f] zero shift in ctr : <0.5% f.s. / 108 f sensitivity shift in ctr : <1.10 -4 / f of reading electrical characteristics model CS1060 CS1060-a1 CS1060-a2 supply voltage 10 vdc 10 to 30 vdc 15 vdc (12 to 18 vdc) f.s. output 2 mv/v 0.5 to 4.5 v 5 v zero offset <5% f.s. 2.5 v 5% f.s. 0 v 5% f.s. input impedance/consumption 350 to 700
<50 ma <50 ma output impedance 350 to 700
<10
<10
insulation under 50 vdc ? 100 m
? 100 m
? 100 m
electrical termination connector output including mate mechanical characteristics material : body in stainless steel, aluminium alloy housing connection : square male couplings standard depending on f.s. (see table on reverse side) other connection types on request (smooth shaft, cotter pin, etc.) product references low level output sensor model full scale range (f.s.) in lb-ft option(s) et1 : ctr -20 to 100 c [-4 to 212 f] otr=ctr pe : cable gland termination with 2 m [6.5 ft] cable CS1060 80 et1 high level output sensor model power supply reference a1 : unipolar-tension a2 : bipolar-tension full scale range (f.s.) in lb-ft option(s) et1 : ctr -20 to 100 c [-4 to 212 f] otr=ctr pe : cable gland termination with 2 m [6.5 ft] cable CS1060 a1 80 et1 wiring schematic CS1060 CS1060-a1 CS1060-a2 free datasheet http://www.datasheet-pdf.com/
|
